Realizing the growth of the market, Pioneer has created two new battle / performance DJ mixers that will match Pioneer’s CDJ turntables in both form and function,” said Karl Detken, director of marketing for the professional audio division of Pioneer Electronics (USA) Inc. “Pioneer reached out to industry professionals during the creation of these mixers, as a result these new mixers are offering improved sound quality and reliability plus a host of new effects.

The black edition has never been released, only the silver one.

Extended information

1) The colorful effect which actualizes new DJ performance (the sound effect) (the DJM - only 909)
2 systems, effect of 50 types (new): It is possible in every channel, to choose 3 types from the midst of effect of 50 types, to pre-set. If the effect name which is indicated in the liquid crystal touch panel of substance heaven surface top is traced with the finger, new DJ performance is actualized e.g., effect changes continually.
Fader - effect (new): As the cross fader - and the channel fader - with the sliding knob, operativity it improves the industry beginning which which changes the parameter of effect * " the fader - with effect " of 4, in comparison with the former rotary type knob, colorful Lee mix / DJ play was made possible e.g., effect is bet on scratch sound.
Beat effect: The BPM which it measures (the Beat Per Minute), production of various sounds such as echo and delay is possible without letting escape timing it is linked due to " beat effect ".
Effect frequency selection: The frequency range which applies effect (the HI, the MID and the LOW) selection is possible. Of course, also simultaneous selection of two or three frequency ranges is possible.


2) With improvement of operativity, the cross fader which can customize the user - function
Cross fader - * feeling * adjustment (new): DJ each one in the feel which it is easiest to use, the cross fader - can operate the important cross fader - the operation impression (weight) the industry beginning which can be adjusted * " the cross fader with - * feeling * adjustment " of 4 for the DJ.
Cross fader - * cutting lag (new): The cross fader - play the both ends (operating, functioning it does not do and the range where sound does not come out) it can set with " the cross fader - * cutting lag ", the case of scratch also the being cut off of sound is adjustment possible.
Cross fader independence adjustment of - * curve (new): Because symmetrical shape the industry beginning * left and right independence adjustment of 4 (33 stages) it made possible vis-a-vis the general former cross fader - * curve, furthermore colorful DJ performance is possible.
Non- contact cross fader -: The cross fader which is used hard in the extreme DJ performance -, non- contact optical formula of this corporation individual development was adopted, durability * stability improved markedly.


3) With the touch panel display which indicates colorful information, simplicity operation actualization (the DJM - only 909)
The fader where the DJ has set to the liquid crystal display which arranges on substance heaven surface top, - state (the curve, reverse and cutting lag) et cetera can verify the various information which are necessary, for Lee mix " the fader such as - * editing * monitor " indication / DJ play are indicated. In addition, with adoption of the touch panel, just touches selection and the like of effect is possible.

4) Treble quality design
Close examination and internal constitution of the part which goes into detail were taken a second look and by the fact that transmission route of the signal is made short, the club sound which has power was actualized.

5) Other things
As the mixer for the DJ the industry beginning * the foot switch of 4 (selling separately) due to ON of the effect / OFF is possible. (DJM - only 909)
Applying condition of effect can be controlled " mixed * ratio ". (DJM - only 909)
By connection, the fader - being linked to operation with the control cable, the CD player for this corporation DJ is possible starts " the fader - * start * play ".
In sound of the musical instrument strength (- the 26dB - the + 6dB) it became independent in every channel which is attached, " 3 bands * equalizer - " of the HIGH, the MID and the LOW it equips.
The fader - making operation direction opposite it is possible, " the fader - * reverse ".
Finely the channel * fader of 33 stages adjustment of the - * curve is possible.
You can connect to the other mixer and the series, you can output the sound which is mixed " session " function.

Technical specifications

Input Terminal (Input Level / Impedance)
CD 1, 2 -14dBV (200mV) / 22k
LINE 1, 2 -14dBV (200mV) / 22k
PHONO 1, 2 -54dBV (2mV) / 47k
MIC -54dBV (2mV) / 3k
SESSION IN -14dBV (200mV) / 22k
RETURN -7.2dBV (437mV) / 22k

Output Terminal (Output Level / Impedance)
MASTER OUT 1 (XLR) 2.2 dBV (1.23V) / 60k
MASTER OUT 2 (RCA) 0 dBV (1V) / 1k
BOOTH/SESSION OUT 0 dBV (1V) / 1k
SEND -14 dBV (200mV) / 1kO

Headphone Maximum Output (Output Level / Impedance)
PHONES 0 dBV(1V)/22

Frequency Response
LINE/MIC 20Hz to 20kHz
PHONO (RIAA) 20Hz to 20kHz

Signal-to-noise Ratio
LINE 87dB
PHONO 77dB
MIC 64dB

Distortion Rate
CD, LINE 0.02% or less
Cross Talk (1kHz) 70dB or more

Channel Equalizer (LINE/PHONO)
HI -26dB to +6dB
MID -26dB to +6dB
LOW -26dB to +6dB

Mic Equalizer (MIC)
HI -12dB to +12dB
LOW -12dB to +12dB

Power & Physical
Power Requirements N. America - AC 120V, 60Hz / Europe - AC 220-240V, 50/60Hz
Power Consumption N. America - 31W / Europe - 30W / Japan 27W
Dimension (W x D x H) 251 x 381.6 x 107.9 (mm) / 9.9 x 15 x 4.2 (inches)
Weight DJM-707 - 6.3 kg (13.9 lbs)