From inputs to outputs, we created Xone:02 to be the world’s greatest battle / scratch mixer. Every fader is a deluxe VCA design, they’re all reversible, they all have contour controls and they can all be easily replaced by removing the steel faceplate. We’ve kept the fader area clear for action and we’ve kept controls like pan and EQ out of the way on low profile sliders. Even the transform switches can be rotated to work the way you like them. Don’t go into battle with anything less.

Technical specifications

OdBu = 0.775 Volts rms +4dBu = 1.23V rms
OdBu = 1 Volt rms -10dBV = 316mV rms

Maximum output level
MAIN OUT +23dBu into >2K ohm load
EFFECT SEND +21dBu into >2K ohm
LINK/BOOTH +21dBu into >2K ohm

Internal headroom
Channels +21dBu
Mix to output +23dBu

Peak indicators meters
12bar peak reading Peak on 8dB before clipping

Frequency response
20Hz-30kHz 0/-1dB

Distortion THD+noise measured at +10dBu 1kHz
0.04%

Crosstalk channel shutoff measured at 1kHz
<90dB

MIC EI Measured with 150ohm load
129dB

Residual output noise - non weighted 22Hz-22kHz filter
<88dBu

Mix noise - non weighted 22Hz-22kHz filter
<-81dBu

Power Supply Internal switch mode power unit with auto sensing mains input.
Mains In socket IEC 3 pin
AC Mains 100-240V AC 50/60Hz
Power lead Country dependent
Consumption 30W max
Fuse Rating T500mA 20mm
Internal power rails +/- 16volts